LaserMarkingBrochure
Floor Laser Marking Machine
PORTABLE DOT PEEN MARKING MACHINE Hanson Part No. 20006
Sample Markings
The Hansco-Mark Portable Dot Peen Marking Machine is the perfect tool for any tool room or maintenance department. This machine can be run off a 110-volt wall plug, but if complete portability is required, can also run for up to 4 hours via an on-board,
rechargeable battery. This machine runs on electricity only and does not require any connections to pressurized air. For increased portability the entire system comes complete on a wheeled cart to quickly move the machine from one job location to the next. Once at the job location simply lower the stabilizing pads on the bottom of the cart, then the 15-foot cord allows for a large working diameter without having to move the cart with you. To provide the ultimate in comfort the marking head has been designed to reduce the amount of vibration that is experienced by the user. Components within the marking head are optimized to have the fewest fasteners possible to increase the life of the machine. The marking head enclosure is comprised of one solid piece of aluminum to reduce vibration and increase product life span.
Item # 20006 Character Height
≤ 60mm
Battery Type
Lead-Acid
Battery Volts
12V
Battery Replaceable
Yes
MICRO-PERCUSSION
Run Time with Battery
3-4 hours
Marking Area
2.36” x 5.1”
ACCESSORIES
Marking Depth
≤ 0.3mm
Marking Speed
2-5 Characters/Second
Overall Depth
28”
Overall Height
43.3”
Overall Width
20”
MICRO-PERCUSSION MARKING
Cooling Method
Air Cooled
Phase
1
Rockwell HRC Limitation
62
Voltage
110V
Amps
10A
Net Weight
28.6 lbs. 37.5 lbs.
Gross Weight
Pull-out try for keyboard and mouse
20-WATT PORTABLE FIBER LASER MARKING MACHINE Hanson Part No. 21035
Item # 21035 Character Height
≥ 0.05mm
The Hansco-Mark Portable Fiber Laser Marking Machine is the ultimate solution for all your laser marking needs. With its portable marking head, this machine allows for repeatable marking using a heavy-duty threaded table but can also mark large parts that cannot be placed on the table. Marking large parts such as car frames and steel racking is made easy with a removeable laser marking head. This machine is built on a sturdy base that is fitted with
FLOOR MODEL LASER For any user with laser marking needs, C.H. Hanson lasers are the ultimate solution. The floor model is perfect for all levels of laser experience, having a wide variety of uses without the large footprint of other lasers. The easy to open door allows for quick access to the marking table, with side doors that can be detached to fully integrate the machine into assembly lines. This laser has the power to mark any metal from aluminum to stainless steel, as well as, non-metals such as plastics, denim and organic materials. The machine is run by a user-friendly system, which can create photos, text, barcodes and much more. A 10-inch, touch screen, computer is the brains behind this laser, which mounts directly to the side of the machine cabinet. This system has enough built in storage to hold over 45,000 programs, with 4 external USB ports to hold portable storage drives for increased space. STANDARD FEATURES: •Removable side doors allow for large workpieces and for the machine to be integrated directly into an assembly line •Keyboard and mouse tray allow for easy storage •Pilot laser allows for easy workpiece alignment by showing either a box where the contents will be marked, or it can show the exact text that you wish to mark •Easy to use focus finder enables the user to quickly find the focal point of the laser for precise laser marking •Rotary chuck allows for simple marking of round or cylindrical workpieces •The combination of touchscreen computer, wireless keyboard, and mouse allow for quick simple operation •EZCAD 2 provides a simple user friendly operating system with a wide variety of design options
Laser Power
20W
Laser Wavelength
1064nm
Laser Repetition
≤ 100kHz
Repetiton Precision
±0.005mm
21050
21052
four heavy duty casters for simple maneuverability. Equipped with an on-board, rechargeable battery the laser can be taken any where it is needed indoors and outdoors. STANDARD FEATURES: •Removeable marking head allows user to take the laser to the workpiece •Extra-large casters on machine base allow for easy maneuverability to any location •On-Board rechargeable battery for complete portability •Computer system is directly mounted into machine cart requiring no extra computers or software •Includes rotary chuck for marking round workpieces
Battery Type Battery Volts
Lead-Acid
Laser Type
Fiber
Fiber
12V
Laser Power
50 Watt
20 Watt
Battery Replaceable Run Time with Battery
Yes
Laser Wavelength
1064 nm
1064 nm
45mins-1hour
Marking Depth
<0.05"
<0.05"
Marking Area
7” x 7”
Minimum Line Width
0.0004"
0.0004"
Marking Depth
≤ 1.2mm
Minimum Character Size
0.002"
0.002"
Marking Speed
0-394 Inches/Second
Reptition Precision Cooling Method
+/- 0.0004"
+/- 0.0004"
Overall Depth
19.7” 55.9” 36.2”
Air Cooled
Air Cooled
Overall Height
Beam Quality Marking Area Marking Speed
<1.5
<1.5
Overall Width
7" x 7"
7" x 7"
Cooling Method
Air Cooled
472.5 Inch/s
472.5 Inch/s
Phase
1
Voltage
110/230V
110/230V
Voltage
110V
Phase
1-Phase
1-Phase
Amps
10A
Machine Dimensions
41" x 42" x 64" 41" x 42" x 64"
Net Weight
220 lbs. 297 lbs.
Net Weight
648 lbs.
648 lbs.
Gross Weight
800-827-3398 | chhanson.com | sales@chhanson.com
800-827-3398 | chhanson.com | sales@chhanson.com
4
5
Made with FlippingBook Online newsletter